Technical maintenance and upkeep create successful charcoal making equipment

We all know that charcoal making equipment is a popular equipment today. Due to the environmental protection and energy saving of the equipment, it has attracted many people to invest. However, no matter how good the equipment is, it has a limited use period. After a period of use, the equipment will inevitably be damaged. This is the topic that we want to discuss today, the maintenance and upkeep of charcoal making equipment.

For a brand new set of charcoal making equipment, if the technicians operate the equipment according to the technical essentials and operating procedures, only the briquette machine needs to be frequently repaired. Drying and kilns are generally not used. The vulnerable parts of the briquette machine are the propeller screw and the forming sleeve. If you don't master the forming principle and have no practical operation experience, it will be difficult to repair. At first, the equipment maintenance worker in our factory was the person who worked the longest. Once the technology is mastered, as long as the maintenance points and skills are clear, it should be said that it is very simple. The sleeve is also worn, not as severe as the screw, and it is not easy to repair manually. It depends on the replacement of good accessories. Low-cost and long-life sleeves, the equipment maintenance cost per ton of product is only about 20 if the technology is well mastered. If the technology is not well mastered, it is normal for the direct cost to increase several times, and the indirect cost is even greater (for example, the equipment cannot work properly, resulting in waste or production suspension).

In addition, it should be noted that the maintenance process of the mechanism Charcoal machine equipment before and after use should be treated separately, and reasonable maintenance measures should be made for different situations. The mechanism charcoal machine equipment of Heying Charcoal Machine Factory mainly includes: straw crusher, airflow dryer, 50 rod making machine and smokeless distillation carbonization furnace. In the initial installation of the overall equipment, it is necessary to pay attention to the matching performance of each part of the equipment and the various maintenance requirements of the equipment running-in period, and regularly maintain the circuit parts of the equipment. Among them, special attention should be paid to the lubrication and maintenance of the bearing connection parts of the straw crusher and 50 rod making machine, and the tightening of the equipment installation bolts to ensure the safe and stable operation of the equipment. In the later maintenance, it is necessary to pay attention to the replacement of the engine oil in the gearbox and the repair welding or replacement of the worn parts of the equipment to ensure the service life of the equipment and enhance the anti-fatigue strength between the equipment components.

The above is an introduction to the maintenance of machine-made charcoal machine equipment. I hope it will be helpful to those friends who are new to the charcoal machine industry!