Why avoid overnight production of raw materials for charcoal making equipment? How to control the moisture content of raw materials for charcoal making equipment?

Kaibang Machinery has always adhered to the concept that only advanced technology can develop better in the market. After continuous summarization of experience, it has developed the core technology charcoal making machine, and found a technical innovation method suitable for the development of manufacturers. It operates according to the actual requirements of users, innovates the current existing technology, and promotes the upgrading and development of charcoal making machines. So why avoid overnight production of raw materials for charcoal making equipment? How to control the moisture content of raw materials for charcoal making machines?

Why avoid overnight production of raw materials for charcoal making machines?

As a process equipment developed in the carbon industry, the charcoal making machine has more advanced and prominent carbon making effects and use space than other carbon making processes. The main supporting equipment of the charcoal making machine includes wood crusher, dryer, Sawdust Briquette Machine, carbonization furnace, etc. After improving the equipment, first control the moisture content of the raw materials to 6%-12% to make rods, which is the premise to ensure the overall charcoal production effect. Excessive water content will cause the firewood sticks to be too soft and unable to be carbonized.

The Charcoal machine uses waste materials such as sawdust, rice husks, peanut shells, and bamboo chips to replace traditional charcoal by extruding and burning them into charcoal. It not only transforms the bamboo sawdust, rice husks and other waste materials that were originally ignored into treasures, but also is accepted and recognized by the market with many advantages such as simple operation, convenient maintenance, large output, and no pollution.

From a scientific point of view, the environment itself has a certain humidity in the air, naturally including the working environment of the charcoal machine equipment; after the raw materials of the charcoal machine are dried, although the humidity of the raw materials required for the rod making process at that time is guaranteed, this does not mean that the requirements of the rod making process are permanently met. The raw materials should be processed as much as possible within 6 hours, otherwise if the storage time is too long, the raw materials will adhere to the environmental humidity, especially the raw materials should not be made the next day after drying, so that the water content of the raw materials will be completely out of control, and there will be no corresponding quality assurance. At that time, in order to ensure the quality of the charcoal machine rod making equipment, it is necessary not only to control the humidity of the raw materials, but also to pay attention to the raw materials after drying. Don't miss the good time of making rods. Prevent economic losses caused by the failure of subsequent production processes due to excessive water absorption of dry raw materials in the air.

The overall production effect of the charcoal machine is very obvious, and its operating performance is stable, the advanced technology is perfect, and the users are very recognized for the production quality of the charcoal machine, which has realized the long-term pursuit of the majority of users and made the charcoal machine highly recognized in the market.

How to control the moisture content of the raw materials of the charcoal machine?

The moisture content of the raw materials of the charcoal machine equipment must be controlled within 12%. The charcoal machine equipment has high requirements for the moisture content of the raw materials during the production process, and the moisture content of the raw materials is generally between 6% and 12%. If the moisture content is <6%, the raw material conversion and viscosity are poor, and the rod is not strong; if the moisture content is >12%, the rod is soft and easy to bend, cracks are prone to occur, and the density is low.

It is difficult to detect the moisture content of the raw materials of the charcoal machine equipment by naked eye observation, and it is usually roughly identified by hand feel. First, we touch the outer shell of the separator that is working with our hands, and its temperature makes our hands feel hot; secondly, look at the color of the material that has just come out, which is required to be yellow; then grab a handful of the material that has just come down with your hands, rub it into a ball with your palm, and then let it go suddenly, requiring the raw materials to be scattered all over. Therefore, users who invest in charcoal machines must pay special attention to charcoal technology issues. If the moisture content of the raw materials of the charcoal machine does not meet the standard, it is necessary to configure appropriate drying equipment. Materials with appropriate moisture content have higher yields and better flammability when producing charcoal.

When operating the charcoal machine to produce charcoal, users must avoid overnight production of raw materials, which will produce poor quality charcoal. At the same time, they must also control the moisture content of the raw materials of the charcoal machine, so that the quality of charcoal produced by the charcoal machine will be better, ensuring its production quality and bringing more profits to themselves.