About the maintenance and repair of charcoal processing equipment

Charcoal processing equipment is one of the hot-selling environmental protection equipment in recent years. The maintenance and repair of charcoal processing equipment is a relatively complicated task. The screw repair of machine-made charcoal technology is one of its core technologies. Many charcoal factories cannot support themselves because they cannot repair suitable and durable screws. The main reasons why the screw cannot be repaired are as follows:

1. The quality of the welding materials used is too poor, resulting in too short a time. Because it must be wear-resistant and high-temperature resistant, the welding rods generally used on the market generally take about five to ten hours. Good materials must be used. Our best materials can be used for more than 100 hours if the welding is qualified.

2. The welding process is not good. Most of the welding on the market is done by electric welding. The longest I have seen so far is about 30 hours. Oxygen welding or Shanghai Qisheng and Shanghai Zhanggong's spray welding process is used, because electric welding cannot solve a high-temperature resistance problem, and wear-resistant materials are difficult to evenly dissolve into steel materials during electric welding.

3. Different compression ratios are required for different materials. This is the fundamental reason why many screws are not known to have any problems, the shaft is also correct, and it is not worn. It works well on the first day but not on the second day. The fineness and coarseness of the material have different requirements for the screw. Generally speaking, the compression ratio of miscellaneous wood is small, and the compression ratio of fir is large. This is also the reason why many people say that fir sawdust is worthless and cannot be made into sticks. This requires the production personnel to make judgments based on experience and materials. It is best for a factory to have screws for multiple materials, and various materials should be roughly separated.

Charcoal processing equipment is a professional machine for producing machine-made charcoal. This product is an indispensable product in people's lives. It is cheap and has a wide range of uses. It is strongly advocated by our country and sells very well in the market.