How does an environmentally friendly charcoal machine produce high-quality mechanism charcoal?

With the surge in the amount of solid waste discharged in my country, we have suffered from serious environmental pollution and the gradual depletion of natural resources. Therefore, the country is planning how to redevelop and utilize these solid wastes. The mechanism Charcoal machine developed by Kaibang Machinery is an environmentally friendly mechanical equipment that can turn waste into treasure. This equipment soon became a nationally advocated project for getting rich.

China is a large agricultural country. The raw materials for charcoal machine production can be found everywhere, and they are cheap and never exhausted. The Kaibang charcoal machine is a machine that squeezes sawdust, branches, peanut shells, cotton stalks, straw, wood chips and other crop wastes into mechanism charcoal through high temperature and high pressure in a Sawdust Briquette Machine. 24-hour assembly line work. This project is a small investment with a big return. We have found a way to get rich for farmers.

So how is high-quality mechanism charcoal produced? To ensure the quality of mechanism charcoal, first of all, ensure the dryness of the raw materials. The quality of mechanism charcoal depends not only on the charcoal machine equipment, but also on the amount of water contained in the raw materials. Generally, the moisture content of the raw materials is required to be less than 12%, but also greater than 6%. Therefore, our first step is to dry the raw materials. The raw material rod making is completed in the molding machine (or Sawdust Briquette Machine). There are three heating rings outside the molding cylinder of the molding machine, which can raise the temperature of the molding cylinder to about 350℃. Next, we will analyze the relationship between charcoal and temperature through raw materials, molding, carbonization, and finished products. The whole process of burning charcoal deals with heat. The amount of heat can be measured by a specific temperature. In order to ensure that the density of the charcoal firewood stick is high, the surface is smooth, and there are no obvious cracks. We can choose the appropriate molding temperature according to the type and moisture content of the raw materials. Its height can only be determined through field tests. Generally speaking, if we assume that the screw propeller is qualified and the moisture content of the raw materials is between 6 and 12%, we can control the final molding temperature of wood chips, wood sawdust, wood shavings and bamboo raw materials between 260 and 320℃.