Operation requirements and maintenance of new charcoal machine equipment

Let's first talk about the educational level and relevant knowledge level requirements of the technical operators of the new Charcoal machine production mechanism. The production technology of the new charcoal machine has certain difficulties, but there are no special requirements. Of course, in the production process, the requirements for personnel in different production links are also different.

1.It is better to use personnel who are not afraid of dirt or tiredness in the raw material procurement and drying links. Everyone knows that the raw materials are abandoned crops and forestry waste, which are relatively dirty and tiring, so the selection of personnel in this link should be good.

2. It is best to use younger personnel in the stick making link, because this link requires people with certain acceptance and understanding ability, fast reaction speed, and ability to adapt to changes. The main equipment is the stick making machine.

3. In the carbonization link, at least one person with a strong sense of responsibility, who can command the team and adjust the rest time at any time, so there is no need to deliberately require age.

4. The last link, finished product inspection and packaging, requires serious and responsible personnel who strictly control the quality.

5. The next is the equipment maintenance personnel, which does not need to be repaired frequently.

Next, we will introduce what equipment and where problems are prone to occur in the new charcoal machine. In fact, charcoal machine equipment does not need frequent maintenance, but maintenance is essential. If the operator operates according to the technical essentials and operating procedures, it basically does not need frequent maintenance. Dryers and carbonization furnaces are generally not used. The wearing parts are the propeller screw, and the forming sleeve can also be included. If you don't master the forming principle and have no actual production experience, it will be difficult to repair. At first, the equipment maintenance worker in our factory was the one who worked the longest. The technology is mastered, the maintenance points and skills are clear, it should be said that it is very simple. The sleeve is also worn, not as severe as the screw, and it is not easy to repair manually. It depends on good parts replacement. Low-cost and long-life sleeves, the equipment maintenance cost per ton of product is about 20 if the technology is well mastered. If the technology is not well mastered, it is normal for the direct cost to increase several times, and the cost of indirect expenditure is greater, so it is necessary to rely on continuous maintenance to reduce the maintenance rate and increase production output.

Finally, let's talk about the special requirements for processing raw materials and production processes in the production and export of machine-made charcoal. For exporting machine-made charcoal, customers generally require ash content, volatile matter, moisture, carbon content, calorific value, and the appearance of the charcoal (including hardness, density, outer surface and size, etc.). The quality of raw materials determines the calorific value, carbon content and ash content, so no matter how high the technology is, export products cannot be made with poor raw materials. The quality of stick making mainly determines the appearance of charcoal. And kiln firing is of great importance, and all factors here are affected by the kiln firing process. Therefore, in the requirements for exporting machine-made charcoal, you must meet the above points, then your product will be very popular. The new charcoal machine presents you with a new world.