Monthly maintenance of charcoal machine equipment

The maintenance of Charcoal machine equipment is a key intentional measure. As a professional charcoal machine manufacturer and seller, Kaibang Machinery briefly summarizes the daily cleaning work of charcoal machine equipment, conducts regular inspections of the machine parts every month, maintains the air circulation in the venue, and adjusts the equipment to be loose and tight.

First, conduct regular inspections of the machine parts once a month to check whether the worm gear, worm, bolts on the lubrication block, bearings and other active parts are flexible and wear-resistant. If defects are found, they should be repaired in time and should not be used reluctantly. Second, the charcoal machine equipment production line should be placed in a dry and clean room for use, and should not be used in places where the atmosphere contains acids and other corrosive gases to the machine body. Third, after the charcoal production line equipment is used or stopped, the rotating drum should be taken out for cleaning and brushing the remaining powder in the bucket, and then installed properly to prepare for the next use. Fourth, when the drum moves back and forth during work, please adjust the M10 screw on the front bearing to the appropriate position. If the gear shaft moves, please adjust the M10 screw behind the bearing frame to the appropriate position, adjust the clearance so that the bearing does not make noise, turn the pulley by hand, and tighten it appropriately. Too tight or too loose may cause damage to the machine. Fifth, if the machine is not used for a long time, the entire production line of the equipment must be wiped clean, the smooth surface of the machine parts must be coated with anti-rust oil, and covered with a cloth.